Description
The Leoch LDC12-115-G31-T delivers the same 115Ah true deep-cycle AGM performance as our LDC12-115-G31-DT, but in a single bolt-in terminal configuration instead of dual stud terminals. If your equipment's factory cable ends are built for a single top terminal rather than a dual-post setup, this is the version that will bolt straight in without an adapter.
Built on Leoch's proprietary paste formula and highly refined AGM separator, the LDC12-115-G31-T is engineered for up to 1300 cycles at 50% depth of discharge — well beyond what a standard starting or marine battery can handle. It uses high-purity lead-calcium grids, advanced TTP welding for low internal resistance, and copper alloy terminals for strong conductivity under high-rate discharge. The rugged case is sealed and valve-regulated, so there's no watering and no spill risk.
Why choose the LDC12-115-G31-T
- Single bolt-in terminal (T11) — a direct fit where dual stud terminals aren't compatible
- Maximum deep-cycle performance: up to 1300 cycles at 50% DOD
- High charge acceptance for faster recharge between shifts
- Standard BCI Group 31 case size for easy swaps
Specifications
| Model | LDC12-115-G31-T |
| Voltage | 12V |
| Capacity (20HR) | 115Ah |
| Capacity (5HR) | 95Ah |
| Capacity (3HR) | 85Ah |
| Reserve Capacity @25A | 239 min |
| Reserve Capacity @56A | 95 min |
| Reserve Capacity @75A | 65 min |
| Length | 330mm (12.99in) |
| Width | 173mm (6.81in) |
| Height | 212mm (8.35in) |
| Total Height | 220mm (8.66in) |
| Weight | 31.4kg (~69 lbs) |
| Terminal | T11 bolt-in (single terminal) |
| Case Material | ABS |
| Battery Type | Sealed AGM, valve-regulated, maintenance-free |
Ships with a full manufacturer warranty. Not sure whether your equipment needs the single-terminal (T) or dual-terminal (DT) version? Message us before ordering and we'll help confirm.