Description
If a site has outgrown a walk-behind but does not need the 46-inch width of a Factory Cat XR, the Tennant T15 sits in that gap as a 36-inch ride-on scrubber. It is a discontinued Tennant model and this one is offered as a reconditioned machine, which is how many buyers get rider productivity without new-machine cost.
The ride-on format changes the economics against something like the Tennant T350 stand-on: the operator sits, the tanks are much bigger (45 gallon solution, 55 gallon recovery), and the machine reaches 6 mph in transport. In exchange it is a large machine, over 70 inches long with a 82 inch minimum aisle turn, so it needs room to maneuver. As it is reconditioned and no longer in production, check parts and service support for your area before committing. The figures below are from Tennant's published spec sheet.
Specifications
- Cleaning path: 36 in (910 mm), scrub head offset 2 in
- Disk head: 18 in brushes, 320 rpm, up to 200 lb down pressure, two 0.75 hp brush motors
- Cylindrical head option: 6 in brushes, 750 rpm, up to 90 lb down pressure
- Solution tank: 45 gal (170 L)
- Recovery tank: 55 gal (208 L)
- Vacuum water lift: 70 in
- Propel motor: 1.5 hp
- Forward speed: up to 6.0 mph
- Reverse speed: up to 2.5 mph
- Gradeability: 4 degrees while scrubbing, 8 degrees in transport
- Battery: 235 Ah standard
- Length: 72 in
- Minimum aisle turn: 82 in